Tag Archive for: 3 plate injection mold

3 plate mold

What is 3 Plate Injection Molds

3 plate injection mold (three plate injection mold) is one of the injection molding tools that manufacturers use to create plastic components. Other tools include injection molding tools. It is impossible to have a complete mold design for a plastic product without the three primary plates that are responsible for forming the cavity and runner system of the mold. People tend to refer to the first of the three plates as “A,” the second as “B,” and the third as “C” of the set. The following is a compilation of the functions that they perform:

  • Plate A, also known as the first plate, is the mold’s foundational, immovable surface. It typically includes the sprue, the main conduit for injecting molten plastic into the mold.
  • The second plate, or B plate, is a movable one that aids in making the main hole for the plastic component. The B plate is moved when the mold closes, letting the molten plastic flow into the cavity and shape the product as desired.
  • Three-Plate C-Shape: An additional moveable plate that helps eject the molded part from the mold is the C plate. At the end of the molding process, it usually has ejector pins or some other mechanism that forces the plastic component that has solidified out of the mold.

Distancing the runner system from the molded part is the defining characteristic of a three-plate injection mold. The injection unit empties its molten plastic into the cavity via the channels that make up the runner system. The benefits of this separation include shorter cycle times and easier product ejection, and it also makes it possible to create more complicated mold designs.

3 plate injection mold


I. Components of a 3 Plate Injection Mold

When plastic injection molding parts with more complicated geometries are needed, a three-plate injection mold is an advanced tool that helps with the process by automatically and efficiently separating the part from the runner system. Compared to the more basic two-plate mold, this one has an extra parting plane. A three-plate injection mold system consists of the following primary parts, each of which performs a specific function:

A-Side: In a three-plate injection mold, the A-side is the main cavity plate that shapes the outside of the part that is molded. It has two parts: the core half, which shapes the inside of the part, and the cavity half, which shapes the outside. When the A-side is put on the fixed side of the injection molding machine, it stays in place while the mold is being made.

B-Side: The B-side of the mold, which is also called the “stripper plate,” supports the parts on the A-side and makes it easier for the molded part to come out. It moves with the A-side as the mold opens and closes, which makes it easy to take the part out of the mold after it has been molded. Usually, the ejector pins are on the B-side. These pins push the part out of the mold after it has cooled.

C Plate: The C plate, also called the runner plate or Floating Plate, It houses the runner system that distributes the plastic melt to the different gates. This plate moves independently in a three-plate mold, C plate located between the top and cavity plates, the floating plate houses the gate mechanism. enabling the runner system and parts to be ejected independently, this is key different between 3 plate mold and 2 plate mold.

Sprue and Runner System: In a three-plate injection mold, the sprue and runner system moves the molten plastic from the injection unit into the mold’s slot. The sprue is the opening in the mold where the plastic goes in, and the runners move the material to the different holes. For balanced filling and short cycle times, it’s important that the sprue and runner system is designed correctly.

Cooling System: An effective cooling system is needed to keep the molded part’s structure and cut down on cycle times. A 3-plate injection mold’s cooling system is made up of channels that move coolant around the mold. This gets rid of the heat and hardens the plastic. For warpage, sink marks, and other flaws in the final part to be avoided, the cooling design must be done correctly.

The parts of a three-plate injection mold work together to make precise, high-quality plastic parts quickly and easily. Figuring out what each part does in the molding process is important for making the best molds, cutting down on cycle times, and making sure that the quality of each part is always the same. When manufacturers pay close attention to the A-side, B-side, C-side, sprue and runner system, and cooling system, they can get better results from their injection molding operations.

A Three-Plate Mold Has Many Benefits:

Enhances cycle times by enabling the automated and concurrent ejection of runners and parts.

Allows for the molding of components with more intricate geometries.

It can improve the plastic flow into the mold by incorporating multiple gates.

Drawbacks: Compared to 2 plate molds, it is more complicated, costly, and difficult to produce and maintain.

The complexity of runner ejection could cause longer cycle times.

When it comes to making plastic parts, a three-plate injection mold is a useful tool that allows for the efficient and flexible production of complicated components.3 plate injection mould

If you have a project that you do not know if needs 3 plate injection mold, 2 plate injection mold or hot runner mold? Welcome to contact us, we offer 3 plate injection mold, 2 plate injection mold and other type of plastic injection molds, we will review this for you and send you a quote according to your part design.